Ethernet setup issue

[mw0cvw]

Hello

Trying to get the PC to talk to SBS-3 over the Ethernet.

Connected via USB to confirm the following settings.

Hardware Settings (Network) Bast Station Software.

192.168.1.40

None Volatile Memory Settings

Ethernet Setup Tab

IP 192.168.1.40

Gateway

IP 192.168.1.1


DHCP IP Range is 192.168.1.1 to 192.168.1.200

Remove USB lead cycle power to SBS-3 still no Ethernet light.
Confirmed USB lead now disconnected.

Confirmed I can ping the IP Address of 192.168.1.40 with Dos command prompt in Windows 7

Any suggestions or have i missed a step 

Paul

Mw0cvw

[Anmer]

In Basestation have you set connection to "Use Network"?

[mw0cvw]

Anmer,

Yep the green eyed monster again.

Data source was set at USB

Once changed to ethernet the amber light is working on SBS-3.

Many thanks

Regards

Paul

Mw0cvw

[Anmer]

Great, you're all OK now.

[mw0cvw]

Anmer,

Thanks, all working over Ethernet now.

VLC Media player now working also,stream audio from SDR to PC.

Very impressed with SBS-3.

Regards

Paul

MW0CVW