Welcome to Radarspotting. Please login or sign up.

April 30, 2026, 10:41:10 AM

Login with username, password and session length

New Members

New Members

You should get an activation email when you join.  If not, please use the Contact option.

The death of no.1376

Started by aviaction, September 27, 2023, 12:40:06 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

aviaction

So my 1st SBS1 has just about died.
Bought at the Donington Radio Rally from ML&S soon after the SBS1 was released earlish serial number 1376
Was using in the Loft when lost communication and power on USB. Still worked on USB with external Supplied power Supply
so put into my work desktop.
Just this week went a bit "deaf recently" with no blue leds and only receiving very nearby signal. Testing with a known good sbs with 2-3 leds lit
I don't think thats to bad as almost 20 years old.




SoCal Mac

I'd say you got your money's worth.

mhm

Quote from: aviaction on September 27, 2023, 12:40:06 PMSo my 1st SBS1 has just about died.
Bought at the Donington Radio Rally from ML&S soon after the SBS1 was released earlish serial number 1376
Was using in the Loft when lost communication and power on USB. Still worked on USB with external Supplied power Supply
so put into my work desktop.
Just this week went a bit "deaf recently" with no blue leds and only receiving very nearby signal. Testing with a known good sbs with 2-3 leds lit
I don't think thats to bad as almost 20 years old.

i got mine from AOR in Matlock serial number 000735 still running strong use it when out and about. and replaced for home use with a Puck from a good friend Shakey. The SBS1 was in use 24 hrs a day never turned of still have the original usb lead that lit up.
Mike Colon Cancer Survivor for the Time Being.
Fides In Tenebris.

DaveReid

My SBS-1 (s/n 000008) is still blinking away under my desk, though I noticed that now it shares the outside antenna with my SBS-1eR, the latter detects significantly more packets from what are relatively blind spots on the LHR approach.

I must get round to replacing it with the SBS-3 that's sitting on my shelf and then see if the Science Museum wants it.   :)