How to set up VRS

[airladysmith]

Hi All ,

I can get my VRS to show SBS-1 on my computers using my router - But how do I set up VRS to show on the internet so others can see my screen .

I know it can be done as there are a number of VRS screens to view on the net - I have never figured how it is set up though .

Thanks

Tony

Ladysmith , Vancouver Island

[Jamie]

This might help
http://radarspotting.com/forum/index.php?action=tpmod;dl=item91

[Anmer]

In essence you need to set up port forwarding on your router so that a remote browser connection to your public IP address will get redirected to the local PC running VRS.

For example, if VRS is running on a PC with a local IP address of 192.168.1.6 on port 8080, your router should create a service for VRS on port 8080 and redirect all inbound calls for that port to the IP address of the PC running VRS.

Local Browser = http://127.0.0.1:8080

Remote Browser = http://(your public IP address):8080

If you want to test this I can set up VRS here to allow you to connect via a browser and then we can reciprocate?

[airladysmith]

Thanks Anmer ,

Will set up my router etc. and let you know its done

Tony

[airladysmith]

Hi Anmer ,

OK - I have set the port to 8080 in my router Port Gaming  - Port triggering etc 

Now  - on my own VRS screen I show  http://192.168.0.10/VirtualRadar/GoogleMap.htm# - that shows my SBS screen live 

What will I have to do to show you my VRS live screen to you ? 

The three network address - they show in my VRS 

1 http://127.0.01/VirtualRadar
2 http://129'168.0.102/VirtualRadar
2http://70.66.73.109:8080/VirtualRadar

Thanks

Tony

[Anmer]

Hi Tony

Have you configured port forwarding on your router to allow incoming calls for 8080 to redirect to the local IP address of the PC running VRS?

If I use:

http://70.66.73.109:8080

I get to your webpage which doesn't fully display.