PP port forwarding help

[Anmer]

I don't see this as hijacking a post, I see it as an offer of help and I don't have a problem with satcom withholding details of development work.

And I don't see why Satcom can't share the solution with other Radarspotting members who may have a similar problem.

Perhaps a more helpful response would have been:

"Sure Mike, as soon as we have a fully tested solution I'll be only too happy to share it with the Radarspotting members.  Just need to run some more tests."

All I asked was for the solution to be shared here. I didn't put a timescale on it,  just wanted others to benefit and ensure thread continuity.

[globemaster27]

Yes i have configured PP to be allowed trhough the firewall.. altough that bat file which enables this stuff comes up with an error..

My sharecode is:hi

?

it should be possible trhough a VPN..

[globemaster27]

BTW i am more then happy to receive help through teamviewer...

This is getting tiring, as i have purchased a nie antenna that i really want to share to get mlatting going in scandinavia

[Anmer]

Have you sent a PM to Satcom as he suggested in an earlier post?

[shakysen]

Hi just a thought.In the distant past I encountered a Problem with PP .on checking I had 3 firewalls running WIN,AVG,AN ROUTER

[globemaster27]

Yes i have. anmer

Maybe i shouldnt have? After reading the reactions...

[Anmer]

Maybe i shouldnt have? After reading the reactions...

No problem sending him the PM.  I just want to be sure that any solution is posted here so others can benefit.

[globemaster27]

I will sure do that! i hope i am not the only one having this issue, so i would love to help others.

[globemaster27]

UPDATE:

Soooo, it was too much a hassle with the VPN.. So i just took the direct route to
the ISP, and asked if they could open the port.

They could not, however they could give me a very own IP adress, that would allow port forwarding.

They gave me my own IP adress, and now i am up and running.

For anyone also having issues like this i greatly advice that they should chech if they run through multiple routers.

Thnaks

[Anmer]

Thanks for the update and good to know you found a solution.