Welcome to Radarspotting. Please login or sign up.

March 28, 2024, 08:58:18 AM

Login with username, password and session length

New Members

New Members

You should get an activation email when you join.  If not, please use the Contact option.

Ready to use Image for Pi?

Started by Radio2.0, July 19, 2015, 05:59:19 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Radio2.0

Hey
I hate the Pi...  >:(
I play around with SDR# and the Poo dont work....
And 3 Friends would place a Pi in there Apartment for 1090 Sharing.
Is there any Image for me who is ready to use?
I need to send the Data directly to my VRS i have no access from the Internet to the Pi.
The huge Problem is next week the fly home and i have no idea....
Thanks!!!
>>> I looking for People who want exchange the VRS Data with me. <<<
I life near LOWW / VIE and see Ground Traffic too.

EDDG

288 Posts an now idea how to setup ??? ? Hm... Ok...

Just one hint: http://www.satsignal.eu/raspberry-pi/dump1090.html

For the rest, just look, search and read ;) ...

Best regards,
Peter

Radio2.0

the problem is:
QuoteStart Plane Plotter on your PC.
Select Options => Mode-S Receiver => RTL dongle RPi dump1090 => Setup TCP/IP client.
In the window that appears, type in the IP address of your RPi on your local network, followed by ":30005".  For example, if your RPi appears as IP address 192.168.0.19 on your home network, so type in "192.168.0.19:30005".  Then click OK.
Select Options => I/O settings.
In the dialog that appears check the Input data, Mode-S/ADS-B box, and select "RTL > RPi+Dump1090" from the list window to the right.
Press the green circle on the toolbar to start Plane Plotter monitoring.  The planes that are appearing on the RPi screen should now start to appear on your Plane Plotter screen.
Where the Pi will stand is no way to configure the Router for access from the Net!!!
>>> I looking for People who want exchange the VRS Data with me. <<<
I life near LOWW / VIE and see Ground Traffic too.