puck1090 cutting signal issue

[w4lron]

hi all
I'm having an interesting problem.I'm using kinetic puck 1090 + omni vertical 5db antenna 10m cable.

Marked point receiver position, the signal is lost in the cutting marks.
I don't have problems with different receiver.

Do you have any idea?Thanks.

[Anmer]

Do you have a different antenna you could try with the Puck?

[w4lron]

Do you have a different antenna you could try with the Puck?

Yes, I tried it

I tried to fr24box antenna.The result is still the same 

[Anmer]

What make/model s the other receiver and do you us RS for the comparison?

[w4lron]

What make/model s the other receiver and do you us RS for the comparison?

Other receiver Fr24box no problem!

I tried both at the same point

I did the test with DVB-T in the same area no pronlem!

Puck lives cut in the top flight

[Anmer]

Other receiver Fr24box no problem!

What did you use to view the local traffic from the FR24 Radarcape?

[w4lron]

Other receiver Fr24box no problem!

What did you use to view the local traffic from the FR24 Radarcape?

I watch the local traffic with ADSBScope

[Anmer]

I watch the local traffic with ADSBScope

Thanks.  I thought your screen capture was Virtual Radar Server?

I can remember ADSBScope had some decoding issues.

Can you try each receiver using VRS?

[w4lron]

I watch the local traffic with ADSBScope

Thanks.  I thought your screen capture was Virtual Radar Server?

I can remember ADSBScope had some decoding issues.

Can you try each receiver using VRS?

Now i try it

Indeed, the fundamental data coming out of the basestation 30006

When the signal is lost in the base station program logo is changing, loss passes to the signal logo

[Anmer]

Do you have a Puck and SBS-1?

If you do, using BaseStation, do you lose the data reception when using each receiver and the same FR24 antenna?

[w4lron]

Do you have a Puck and SBS-1?

If you do, using BaseStation, do you lose the data reception when using each receiver and the same FR24 antenna?

No no I'm using SBS-1 a different location and has no connection with it.

I can use puck it in this way.I Add picture.The following link address (removed by Mod)  (puck1090+modesmixer)(link to delete after you see)

[Anmer]

Does the aircraft track disappear in BaseStation connected to the Puck without using ModeMixer?

I have seen no other reports of a Puck causing a signal gap.  There are many reports of antennae doing this but not a receiver.

[w4lron]

Does the aircraft track disappear in BaseStation connected to the Puck without using ModeMixer?

I have seen no other reports of a Puck causing a signal gap.  There are many reports of antennae doing this but not a receiver.

I'm about to eat because of this problem head  I guess, I try and buy a new antenna required

puck connected to pc via USB --> using basestation (It does not work otherwise) --> ModeSmixer2(connected bs 30006)