Welcome to Radarspotting. Please login or sign up.

May 19, 2024, 12:35:41 AM

Login with username, password and session length

New Members

New Members

You should get an activation email when you join.  If not, please use the Contact option.

Best choice for an ADSB receiver on a remote location

Started by MerNion, June 13, 2018, 10:37:07 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

MerNion

Hello,

I was thinking on installing an ADSB receiver in one family house which is very high on a mountain but it is not always attended.. So I would like an option to be as remote controlled as possible.. Maybe a mini-pc with a receiver...? Any ideas?

Thanks!

Anmer

It depends what "attention" is available?

Power outages, router reboots, ISP failures. physical antenna/cable damage can make the receiver/data processing unusable.
Here to Help.

MerNion

There will be someone to do a reset by switching off and on the power..
I will be visiting once every 2-3 months so if there is a physical damage to the antenna cable or antenna I will fix it then.. but on my sbs that is running at home for more than 10 years i never had a problem with the antenna or cable etc.. So i most worry for the architecture of the system more, like if it is better to use a small minipc or another embeded solution etc..
In order to not use long antenna cable and have signal loss I wouls rather put the receiver or the minipc or whatever as close as possible to the place where the antenna will be, so I am thinking of a waterproof electrical box outside next to the antenna with just a power, ethernet and antenna cable coming out.

Has anything like that been done before so it might be another forum thread, blog or something to check it out..?

Thanks

Anmer

I know of many instances of people putting an RPi/SDR receiver combination in a weatherproof box externally.  Some use PoE to provide power.

This can be a low cost setup compared to an SBS or other specialist Mode-S receiver and a PC.

You can use SSH to access the RPi remotely.

The only downside I've exoerienced is some of my RPi/SDR sets do not always reconnect to the local network if there's been a power outage.  A power reboot fixes it.  But sometimes my SBS has the same problem.
Here to Help.

MerNion

A power reboot is not a problem because I can either have the power on a remote controlled power outlet or ask someone to go and do a reset on the power..

I only had SBSs in the past, I don't know anything about he RPi or other SDRs so I will read on those.. Do you know if the Raspberry Pi supports feeding data to Flightradar24, Radarbox24, adsbexchange etc?

Anmer

Quote from: MerNion on June 14, 2018, 03:57:20 PM
Do you know if the Raspberry Pi supports feeding data to Flightradar24, Radarbox24, adsbexchange etc?

Yes.
Here to Help.

MerNion

Thanks! I read about it now on some other posts.. I will try with a rpi for start and we will see from there..

Anmer

Here to Help.

MerNion

Yes I found a tutorial on building one.. Plus power adapter, plus ethernet cable etc... Thanks!