Radarspotting

Mode-S Receivers => DVB-T Dongles and Self-Assembly Receivers => Topic started by: Shakey01 on August 31, 2021, 05:24:32 PM

Title: Modesdeco2 V20150815 issues
Post by: Shakey01 on August 31, 2021, 05:24:32 PM
I've had a RTL2838UHIDIR  stick for many years now, I recently bought a new laptop and all was good for months. Just tried to start up Modesdeco2 and I get 'Device: 1 already in use)' and below that 'Can't open device: sdr_open(): Bad file descriptor'. The drivers on the new laptop were set up using Zadig and worked for months.

I started up the stick on my old laptop and it works fine.

Can anyone give me some advice (hopefully in relatively simple language as my computer skills are average at best)?

Windows 10 laptop.

Thanks in anticipation,

Bill
Title: Re: Modesdeco2 V20150815 issues
Post by: IanH on September 01, 2021, 05:56:06 PM
The error is because Windows drivers are using the dongle.

You need to install Zadig (https://zadig.akeo.ie/) to release them so modesdeco2 can use the dongle.

See post here and just read final paragraph

https://radarspotting.com/forum/index.php?topic=2978.msg46245#msg46245
Title: Re: Modesdeco2 V20150815 issues
Post by: C152 on September 01, 2021, 06:03:51 PM
Thanks IanH.

My reading of the initial message was the "new laptop" has Zadig drivers installed and worked OK "for months".

Looks like something changed?  Maybe a Windows update and the Zadig drivers need to be installed once again?
Title: Re: Modesdeco2 V20150815 issues
Post by: Shakey01 on September 02, 2021, 05:30:09 PM
Thanks for your help gentlemen, I have reinstalled the Zadig drivers a number of times when a Windows update has (I assume) overwritten the driver that works although I can't recall whether I've done that with my new laptop (I only use it when I go the the local airport as I have an SBS running at home and C19 has severely limited flights and thus I have not bothered taking the laptop). This time it just doesn't seem to work. I've re-installed the driver via Zadig and still get the same message. When I go back to Zadig the drivers in the 2 boxes on the Zadig screen are the same so I would assume the driver installation worked.

I tried a different USB port yesterday, do you think I should try that again?

Appreciate your help
Title: Re: Modesdeco2 V20150815 issues
Post by: Anmer on September 02, 2021, 05:34:20 PM
Have you tried a different USB cable?
Title: Re: Modesdeco2 V20150815 issues
Post by: Shakey01 on September 03, 2021, 12:19:06 AM
The stick still works with my old laptop so I assumed it was something to do with the configuration, or a change in configuration,  of the new laptop (it did use to work with the new laptop).

I did try another USB port but with the same result.

Thanks
Title: Re: Modesdeco2 V20150815 issues
Post by: Anmer on September 03, 2021, 07:43:42 AM
Sorry, I didn't appreciate the device was directly connected to your USB port.

To recap, the DVB device has worked with the new laptop and the suddenly stopped?  It still works with the old laptop,

Maybe try a fresh install of Modesdeco2?
Title: Re: Modesdeco2 V20150815 issues
Post by: IanH on September 04, 2021, 04:10:02 PM
Someone on Reddit suggested this as an alternative if Zadig doesn't work. YMMV

https://visualgdb.com/UsbDriverTool/
Title: Re: Modesdeco2 V20150815 issues
Post by: Shakey01 on September 06, 2021, 09:48:16 PM
Thanks Ian, tried it but it's still doing the same thing.

Appreciate all the suggestions.

A question for Anmer, with apologies for maybe not understanding something that might be obvious to many. When you write 'a fresh install' do you mean delete the existing ModeSDeco folder and replace it?

Thanks
Title: Re: Modesdeco2 V20150815 issues
Post by: Anmer on September 07, 2021, 09:56:54 AM
I don't use ModeSDeco but would suggest you try a fresh "install".  Start again.

http://sonicgoose.com/the-easiest-and-simplest-ads-b-solution/
Title: Re: Modesdeco2 V20150815 issues
Post by: Shakey01 on September 10, 2021, 11:05:17 PM
Thanks to all who helped with this, the re-install has worked.

Really appreciate everything.

Bill
Title: Re: Modesdeco2 V20150815 issues
Post by: Anmer on September 11, 2021, 07:45:04 AM
Quote from: Shakey01 on September 10, 2021, 11:05:17 PM
Thanks to all who helped with this, the re-install has worked.

Great to hear you resolved this.  Thanks for the update.