Radarspotting

Hello to all,

Tell them about a strange problem that I started to go this weekend. After operating for months without problems, from one day to another, I am not receiving mode-s messages properly. I have done various tests, as zaggi reinstall driver, rtl1090 and ADSB take sharp, connect the dongle through USB hub and direct, and the only thing that achievement is receiving signals within a 20nm, which makes me think that I the dongle is receiving signals only for himself and not through external antenna. the strange thing is that if I change the settings to rtl1090 A / C mode, the display receives a lot of messages which tells me that the antenna does not have problems. Another test I've done is take ADSB sharp, with adsbscope log mode, and the result is not even a message on the screen or any plane near and reviewing the log of messages received, almost all appear appear as corrupt and with crc error.

someone you will have passed something? the dongle there is some kind of resets to factory mode??

Please confirm your setup:

Make and model receiver
Antenna and location
Decoding Software
Tracking presentation software

Well my problem was solved partially by changing the dongle. I had saved one with problems mcx connector and connecting it I tried it last night and the change was noticeable. alternating either the number of messages in rtl1090 increased considerably, so my personal diagnostic is that something causes the messages in the ads-b being trapped or misconfigured. Here in Chile tomorrow is the national day is a holiday and also on Thursday and Friday lol (which workers), I travel outside the capital, so on Monday I'll be able to get their hands back to the subject. Amner my working arrangement is a dongle with chipset R820t, rtl 1090 for decoding, virtualradar server, which in turn feeds Basestation