Hi all, I'm a new user from Lugo, northwest Spain. I've been using PlanePlotter for years but with no receiver, just shared data. Some days ago a friend told me about rtl dongles, the cheapest way to get aircraft tracking on my own. Now a new world opens in front of me, amazing!!
So this is my equipment: PlanePlotter, R820T dongle, rtl1090 beta 2 software. Sharer "tF" and ground station. Wishing to learn from you all and adjust my installation in the best way. Making a homebrew collinear antenna. A second dongle is in transit to catch all non ADS-B data, as well as a Flightradar24 set to improve Mlat in my zone. And really interested about switching antennas to be able to find voice transmissions. I work in a local airfield (LERO) and all these things are really interesting for me.
Welcome.
Breitling
Greetings and welcome from the other side of Spain, near Reus Airport (LERS). :)
Stephen
Welcome Breitling.
Enjoy!
Tom
Hello Breitling...
Saludos desde ChileĀ”
Bit late in the day...
But welcome to the forum Breitling..
Smudger.
A big thank to you all for the welcome. Now I promise an inminent "question attack" about PP ;)
Hi Breitling, you had me wondering for a few days which forum ;) welcome aboard, you know where i am if you need help.
Saludos
Hi kered, nice to see you here :) I'll need help for sure !! Anyway I'm learning fast, but I want to take the most from PP. You know I work here in the aerodrome, let's see if I can manage to track our local aircrafts.
First stop: make a good collinear antenna. The first one was a "no go" :(
I have one made from 75ohm sat coax and it does well, 8 elements, the last section goes direct to the dongle at about 10 meters.
I used this method http://www.balarad.net/
That's the one I made, but using an old coax from which I have no data about impedance, velocity factor, etc. I'll try with a new cable.
Do you mean 7 elements and the eighth direct to the dongle?
Yes thats correct, 7 elements and the 8th one long to the dongle. in effect all i did was cut out a connector(and hopefully a bit of loss)
Quote from: kered on October 24, 2013, 07:06:09 AM
Yes thats correct, 7 elements and the 8th one long to the dongle. in effect all i did was cut out a connector(and hopefully a bit of loss)
Just a small point here chaps.. a wee bit of thread drift..