Not sure what the problem is.
Running Windows 7.
Using a DVB-T Dongle and RLT1090.
Rebooted laptop and reinserted the dongle as well.
Worked on Saturday.
Today not working :(
Below are two screen dumps from the rTL1090.
Anyone can help me with what might be the problem please.
[Attachment deleted by Admin to save file space]
What's the problem? Is RTL1090 "stalling" during launch?
Launches ok but appears to get to the line below in Mode-S
"DO260A then some symbols
Started"
then stops doing anything :(
Tried clicking on Mode-AC it's blank :(
Right I clicked the [TUNER AGC] button and it has sprung into life BUT
1. the Mode-AC looks like this:
See attachchment mode-ac.jpg
It does not look complete :(
2. the Mode-S looks like this:
[Attachment deleted by Admin to save file space]
I'd try a fresh download of RTL1090 into a different folder and launch it from there.
If you get the same results, maybe the DVB-T has an issue or the antenna connection is bad?
ok will try that ... thanks.
oK I have installed the RTL1090 into another folder and added the associated file and getting the same displays :(
Sounds like a faulty device/antenna.
Darn.
:'(
Looks like no ADSB for me until late August. :(
Thanks Anmer.
If i get anther Dongle ... I assume that as I have already done all the set ups before I can just plug it in ?
RTL1090 appears to recognise the DVB-T so a replacement should be OK being "just plugged in".
Topman .. thanks :)
Brand New Dongle ... exactly the same problem :(
Ideas please :'(
Do you have an alternative PC you could try? Installing Zadig first.
I have reinstalled Zagzig.
I have downloaded and reinstalled RTL1090 - IMU (Installer and Maintenance Utility)
I have rebooted.
And still getting the same corrupt data :(
Quote from: LX-LGN on July 07, 2014, 07:17:00 PM
I have reinstalled Zagzig.
On the same PC?
If the drivers are messed up, I have yet to find a solution to remove them and reinstall from Zadig.
Do you have a different USB port you can try?
Tried it in another USB and same corrupt data.
Uninstalled the driveres following this:
http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/how-to-uninstall-a-driver-completely-from-the/349541ce-7779-492c-9f21-6daa7ec0a5a3
Short of formatting the laptop I cannot see a way of sorting this :'(
I wouldn't go the reformat route yet.
Do you have access to another PC/laptop, even a friend's, where you can test the DVB-T sticks?
OK .. Got it working.
I removed the drivers.
Deleted out ALL the old RTL1090 files.
Used RTL1090 - IMU (Installer and Maintenance Utility)
Followed the instructions (again lol).
Ran RTL1090 and BINGO it worked. :)
Stopped RTL1090 removed new dongle.
Inserted Old Dongle, ran RTL1090 and BINGO - it works!
Looks like removing the RTL and drivers and reinstalling did the trick :)
Good to know you got it working and sharing how.
I suspect the drivers were OK and RTL1090 was the issue. RTL1090 launched OK and found the device. If the drivers are bad, it doesn't find the DVB-T.