Radarspotting
Mode-S Receivers => DVB-T Dongles and Self-Assembly Receivers => Topic started by: Radio2.0 on July 19, 2015, 05:59:19 PM
Hey
I hate the Pi... >:(
I play around with SDR# and the Poo dont work....
And 3 Friends would place a Pi in there Apartment for 1090 Sharing.
Is there any Image for me who is ready to use?
I need to send the Data directly to my VRS i have no access from the Internet to the Pi.
The huge Problem is next week the fly home and i have no idea....
Thanks!!!
288 Posts an now idea how to setup ??? ? Hm... Ok...
Just one hint: http://www.satsignal.eu/raspberry-pi/dump1090.html
For the rest, just look, search and read ;) ...
Best regards,
Peter
the problem is:
QuoteStart Plane Plotter on your PC.
Select Options => Mode-S Receiver => RTL dongle RPi dump1090 => Setup TCP/IP client.
In the window that appears, type in the IP address of your RPi on your local network, followed by ":30005". For example, if your RPi appears as IP address 192.168.0.19 on your home network, so type in "192.168.0.19:30005". Then click OK.
Select Options => I/O settings.
In the dialog that appears check the Input data, Mode-S/ADS-B box, and select "RTL > RPi+Dump1090" from the list window to the right.
Press the green circle on the toolbar to start Plane Plotter monitoring. The planes that are appearing on the RPi screen should now start to appear on your Plane Plotter screen.
Where the Pi will stand is no way to configure the Router for access from the Net!!!