Print Page - Data from SBS-1 to puck

Title: Data from SBS-1 to puck
Post by: MarkInHants on October 06, 2015, 05:31:27 PM

Hi all,
Apologies if it's been asked here before.
My SBS-1 has given up the ghost after over 10 years of loyal service. (as in another topic, not sure what the fault is or if it can be repaired) I am now looking at the puck. The questions I have are:
Does the puck use the same Basestation software as the SBS-1? Can I simply use all the data I already have in my Basestation reporter SQB file from my SBS-1?
MTIA for all replies
Mark....

Title: Re: Data from SBS-1 to puck
Post by: Anmer on October 06, 2015, 05:55:18 PM

You can connect the Puck (only via USB) to the PC running BaseStation and it will feed data as did the SBS-1. You shouldn't need to make any changes.

Title: Re: Data from SBS-1 to puck
Post by: Chris-G0WTZ on October 12, 2015, 02:34:55 PM

You do need the latest Basestation software for the PUCK as earlier versions of the software will not know the puck

Regards

Radarspotting

Mode-S Receivers => Kinetic's Puck => Topic started by: MarkInHants on October 06, 2015, 05:31:27 PM