Radarspotting

Hi,
I've recently moved house but do not remember the commands to restart RPi3 or to enter my new coordinates.

As I didn't fully understand what I was doing the first time, I still managed to setup my feed for ADSBX; 360Radar; FR24 & FlightAware.

I unplugged my RPi3 last week because we were moving and now I can't even remember the commands to set everything up again.

I, vaguely remember, that I was running an RPi3 using Debian (3.xxx I think it was). I installed the ADSBX/FlightAware installation; then I installed the FR24; then lastly, the 360Radar. Everything worked beautifully. Now, I can't remember anything.

From what I can understand, the software should still be installed in my RPi3 but I need to know the commands to:

1) Reconnect to my home network
2) Update my height and coordinates within the RPi3
3) Run the commands to start everything re-feeding to my abovementioned recipients

I do not remember at all what commands to type

I would be extremely appreciative if some kind soul(s) could assist me with this


Best regards,

Andos.

Hi Guys,  I figured out that the problem was rather a simple one.  The reason was because at the old house I had my RPi's config file pointed at our internal network.  I have now changed the settings to log in to the main network (which is the only one set up at present) and now everything works fine.


                Andos