BaseStation loss Operator Flags.

[mw0cvw]

Hi Everyone,

Lost the Operator logo in the base station column for some reason.

Confirmed the flags are contained in the Kinetic\basestation\operatorflags folder.

Any suggestion would be much appreciated,to fix this problem.

Kind Regards

Paul  Mw0cvw

EGGP/EGNR Ground Station Ug

[G4UMW]

Paul,

Do you mean that you've lost the Operator column in the aircraft display? If so, from the toolbar select Aircraft -> Columns and check that the Operator Flag option is ticked. You also need to ensure that the Operator Flag Code field is populated in your SQB file and also that your flags loaded correctly (check the splash screen during the BaseStation boot sequence).

HTH,

Rob

[mw0cvw]

Rob

The Column is being shown correctly in Basestation but the Operator Flags have vanished.

Have checked the required folder which contains the operator logo.

Will do some further investigation

Thanks

Paul MW0CVW

EGGP/EGNR Ground station Ug

[Anmer]

Click on an aircraft record in Basestation and check the OperatorFlag field has a matching BMP file name, such as BAW for BAW.bmp.

If it has, check the OperatorFlags folder for a rogue file using BMPCHK file checker.

See:

http://radarspotting.com/forum/index.php?action=tpmod;dl=item95

[mw0cvw]

Anmer

Your thoughts where completely correct and the utility was a big help.

Operator flags not being displayed in BS as required.

Where can i get the latest logos from,have searched theWeb but they do seem a bit out of date.

Thanks again Anmer & everyone for the support much appreciated.

Regards

Paul

Mw0cvw

EGGP/EGNR Ground Station Ug

[Anmer]

Where can i get the latest logos from,have searched theWeb but they do seem a bit out of date.

You will find may here on the right-hand panel under Links & Files.